Home > PAINT & SUNDRIES > SUNDRIES > TILE PRODUCTS
Choose a sub category:
TILE GROUT MORTAR TILE SEALERS
TILE CLEANERS
Sort By:
1 2 3 4
ZEP ZU104632 Acid Based Grout Cleaner and Whitener SEALER GROUT UC 237ML         House & Home Restore 438 Pre-Mixed Tile Grout?
ZEP Grout Cleaner and Whitener, Acid Based, 1 qt Capacity, Bottle Packing, <1 pH, Liquid, Light Yellow, Sassafras Odor/Scent, Composition: Urea, Hydrochloric Acid, Alcohols, C10-14, Ethoxylated, Flammability Rating: 0, Applicable Materials: Ceramic and Concrete, OSHA Approved, For Kitchen, Bathroom and Ceramic Tile Floors A penetrating sealer that provides protection against most common stains for sanded and non-sanded cementitious grout joints. It can also be used as a pre-grouting sealer. House & Home Restore Tile Grout?, Pre-Mixed, Series: 438, 5 oz Capacity, Squeeze Tube Packing, <40 g/l VOC, 7 - 10 pH, Paste, White, 1 hr, 30 min Tack-Free Drying Time, 1 hr Application, 1 hr Setting, 24 hr Traffic, 48 hr Functional Cure, Mild Acrylic/Ammonia Odor/Scent, >200 deg F Flash Point, Media: Carbon Dioxide, Dry Chemical, Foam
Lepage 394892 Lepage - Poly Filla Tile Grout CLEANER GROUT/TILE 710ML      CLEANER CONC GROUT/TILE 946ML
LePage Poly Filla Wall Tile Grout, Ready-To-Use, 162 ml, Tube Packing, 675000 cP Viscosity, 8.4 pH, Paste, White, 27 - 34 sq-ft Coverage, 24 hr Drying Time, Characteristic Odor/Scent, 23.5 deg C Flash Point, Composition: Isopropyl Alcohol, Crystalline Silica, 1.6 Specific Gravity, For Worktops, Kitchen Areas and Shower Walls Helps to clean and deodorize kitchens and bathroom with a fresh lemon smell. Powerful enough to help dissolve grease and grime. Ideal for kitchen and bathroom countertops. It is safe to use on natural stone, grout and tile. Helps to maintain a variety of ceramic, porcelain and natural-stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum buildup and hard-water deposits. Highly concentrated neutral cleaner with a lemon scent for everyday use. Biodegradable.
CLEANER GROUT/TILE HD 946ML   CLEANER ACIDIC 946ML          SEALER GROUT/TILE 946ML
For use on stone, tile and grout. Formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use. Formulated to remove cement grout haze, mortar residue, mineral deposits, rust stains and efflorescence from tile, concrete and masonry surfaces. It is also effective for removing hard-water stains, lime deposits and soap scum. This product contains no phosphates. Protects against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and cement grout. Contains silicon and can also be used as a pre-grouting sealer.
Polyblend PBG3867-4 Sanded Tile Grout? Polyblend PBG3337-4 Sanded Tile Grout? Polyblend PBG1567-4 Sanded Tile Grout?
Polyblend Sanded Tile Grout?, Series: PBG3867-4, 7 lb Capacity, Box Packing, Solid Powder, NO 386 Oyster Gray, 192 sq-ft Coverage, 18 hr Drying Time, 4 hr Application, 5 hr Setting, 3 days Functional Cure, Composition: Portland Cement, Calcium Carbonate, Gypsum, Silica, Crystalline, Quartz, 2.7 Specific Gravity, Cement Base, 423 psi Tensile Polyblend Sanded Tile Grout?, Series: PBG3337-4, 7 lb Capacity, Box Packing, Solid Powder, NO 333 Alabaster, 192 sq-ft Coverage, 24 hr Drying Time, 4 hr Application, 5 hr Setting, 3 days Functional Cure, Composition: Portland Cement, Calcium Carbonate, Gypsum, Silica, Crystalline, Quartz, 2.7 Specific Gravity, Cement Base, 423 psi Tensile Polyblend Sanded Tile Grout?, Series: PBG1567-4, 7 lb Capacity, Box Packing, Solid Powder, NO 156 Fawn, 192 sq-ft Coverage, 18 hr Drying Time, 4 hr Application, 5 hr Setting, 3 days Functional Cure, Composition: Portland Cement, Calcium Carbonate, Gypsum, Silica, Crystalline, Quartz, 2.7 Specific Gravity, Cement Base, 423 psi Tensile, Trowel Mixing
Lepage 1256124 Lepage - Poly Filla Tile Grout GROUT SANDED 7LB PLTM         Polyblend CPBG3827-4 Sanded Tile Grout?
LePage Poly Filla Wall Tile Grout, Ready-To-Use, 900 ml, Tube Packing, Paste, Tan, 27 - 34 sq-ft Coverage, Characteristic Odor/Scent, 23.5 deg C Flash Point, Media: Carbon Dioxide, Foam, Powder, Composition: Quartz, Titanium Dioxide, Limestone, 1.25 Specific Gravity, For Worktops, Kitchen Areas and Shower Walls For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Polyblend Sanded Tile Grout?, Series: CPBG3827-4, 3.18 kg Capacity, Box Packing, Solid Powder, NO 382 Bone, 3 days Functional Cure, Composition: Portland Cement, Calcium Carbonate, Gypsum, Silica, Crystalline, Quartz, 2.7 Specific Gravity, Cement Base, 423 psi Tensile, 4650 psi Compressive Strength, Trowel Mixing, 50 - 100 deg F, ANSI A118.6
VersaBond CVBG50 Fortified Thin?Set?Mortar Versabond MTSG25 Fortified Thin-Set Mortar GROUT NONSANDED 10LB OYS GRY
VersaBond Fortified Thin?Set Mortar, 50 lb Capacity, Bag Packing, 10 - 12.5 pH, Solid Powder, Gray/White, 24 hr Functional Cure, Characteristic Odor/Scent, >212 deg F Flash Point, Media: Powder, Water Spray, Foam and Carbon Dioxide, Composition: Crystalline Silica, Quartz, Portland Cement, Calcium Carbonate and Gypsum, 2 - 3 g/cc Specific Gravity Versabond Fortified Thin-Set Mortar, Series: MTSG25, 25 lb Capacity, Bag Packing, 10 - 13 pH, Solid Powder, Gray, 24 hr Drying Time, 24 hr Functional Cure, Characteristic Odor/Scent, >212 deg F Flash Point, Composition: Portland Cement, Calcium Carbonate, Mixing Ratio: 6 qt Clean Water per 50 lb Bag of Mortar, 50 - 100 deg F, ANSI A118.4, A118.11 Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
GROUT NONSANDED 10LB BN       GROUT NONSANDED 10LB BRT WHT  GROUT NONSANDED 10LB LIN
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
GROUT NONSANDED 10LB PLTM     GROUT NONSANDED 10LB SUM WHEAT MORTAR 25LB GREY F/TILE&STONE
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. A high performance polymer-modified dry-step mortar. For interior vertical and horizontal tile installation of dimension stone, ceramic, porcelain and quarry over most traditional well prepared, non-deflecting substrates such as plywood, cured conrete, masonry and cement backer units. Do not use for exterior projects. Mix with water only. Has an excellent bond capacity which exceeds ANSI 118.4 requirements. Grey.
GROUT 493ML CLR F/FLR TL      PremiumPlus CPTSW50 Standard Thin?Set?Mortar MORTAR 10LB GREY F/TILE&STONE
The Intelligent grout Sealer from Surf-Pro is an invisible sealer with flexible membrane WITHOUT SILICONE that will protect your grout and porous tiles from stains of coffee, mustard, all kinds of juices and even oils. Its is an anti-stain protector for both interior and exterior use. Limited Guarantee for 15 years. For floor, countertops and wall tile installations. Extra long working time makes it simple to apply and adjust tile. Ultra-smooth and creamy. Exceeds ANSI A118.1 without additives. Exceeds ANSI A118.4 and A118.11 when mixed with thin-set mortar admix. A high performance polymer-modified dry-step mortar. For interior vertical and horizontal tile installation of dimension stone, ceramic, porcelain and quarry over most traditional well prepared, non-deflecting substrates such as plywood, cured conrete, masonry and cement backer units. Do not use for exterior projects. Mix with water only. Has an excellent bond capacity which exceeds ANSI 118.4 requirements. Grey.
WW Henry 13080 Tileflex Plus Thin Set Mortar MORTAR 50LB GRY TL/STN        MORTAR TILE THINSET GREY 50LB
Henry Thin-Set Mortar, Series: 527 Tileflex Plus, Flexible, 40 lb Capacity, Bag, 10.5 - 13 pH, Fine Solid Powder, Gray, 70 - 80 sq-ft Coverage, 48 hr Functional Cure, Media: Dry Chemical, Carbon Dioxide and Foam, Composition: Crystalline Silica, Calcium Formate, Portland Cement and Vinyl Acetate Copolymer, 2.7 - 3.2 Specific Gravity, Applicable Materials: Porcelain, Quarry, Stone, Ceramic and Mosaic Tile, Application Method: Trowel, Portland Cement Base, Mixing Ratio: 6 - 7 qt of Water/40 lb-bag, 2.25 Parts Powder With 1 Part Water by Volume, 70 Deg F, Resists: Water and Frost, For Indoor/Outdoor Surfaces Premium thin-set mortar bag. Portland cement based, pre-blended, smooth consistency, solventfree. Installation of ceramic, quarry, paver & natural stone tiles. Interior & exterior uses. Use over concrete floors & walls. For exterior grade plywood (interior dry floor & countertop only) use thin set additive. Designed for large-format and heavy tile and stone for interior/exterior floor, wall and countertop installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. It is formulated with Easy Glide Technology for ease of application.
   
 
1 2 3 4