Home > HOME IMPROVEMENT > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Choose a sub category:
STEEL PIPE- GALVANIZED STEEL PIPE-BLACK COPPER TUBING-RIGID
COPPER TUBING-COILS PVC PRESSURE PIPE PVC-DWV PIPE
PVC-SEWER & DRAIN CPVC PIPE / CPVC TUBING ABS PIPE
CORRUGATED DRAIN
Sort By:
1 2 3 ... 6
Genova 300 Cold Water Pressure Pipe 10 ft Namasco BLK 1/2 Steel Pipe Genova 31011 Cold Water Pressure Pipe 10 ft
PIPE PRE PVC SDR21 1-1/4ID X10
Our Price: $3.99 Exc GST
JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Namasco BLK 3/4 Steel Pipe Namasco BLK 1 Steel Pipe Genova 31007 Cold Water Pressure Pipe 10 ft
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
PP CELLCORE 1-1/2INX3FT ABS   Namasco BLK 11/4 Steel Pipe Genova FlowGuard Water Pipe
IPEX Pipe, Cellular Core, Nominal Size: 1-1/2 in, 1-1/2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only. Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water.
Cardel Industries 3/4X60K Copper Tubing Genova 31010 Cold Water Pressure Pipe 10 ft Genova 30010 Cold Water Pressure Pipe 20 ft
Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems. JM Eagle solvent weld SDR Series pipes are suitable for use in pressurized irrigation applications. JM Eagle's PVC solvent weld pressure-rated pipes come in SDR 41, SDR 32.5, SDR 26, SDR 21 and SDR 13.5. The pipes are available in 20 ft lengths, bell end, in 1/2 to 12 in Dia. Solvent weld joints are designed to provide a rigid joint connection, and the schedule-rated products are specifically engineered for use in partial support systems above ground. JM Eagle also manufactures this pipe in purple for reclaimed water systems.
Genova 500052 Solid Cut Pipe DRAIN PIPE PERF FLEX 4INX8FT  DRAIN PIPE SOLID FLEX 4INX8FT
Charlotte Pipe Cut Pipe, Nominal Size: 1/2 in, 5/8 in Dia Outside, 2 ft L, CPVC Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in fine soil. Fittings available to adapt to 3 or 4 in, corrugated pipe and 4 in PVC. Ideal for tight spaces and curvy places, taping joints is not necessary. This pipe has spaced slits, so water drains in stages. It's also ideal for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe.
PP CELLCORE 2INX3FT ABS TO DWV PIPE POLYE CSA 75PSI 1/2INX5FT Genova 300 Cold Water Pressure Pipe 20 ft
IPEX Pipe, Cellular Core, Nominal Size: 2 in, 2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS IPEX Pipe, Nominal Size: 1/2 in, 5 ft L, 75 psi, Polyethylene, Black JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
TUBING COPPER TYPE-M SLD 1/2IN Cardel 1/2X2 Copper Tubing Genova 700 Dwv Cut Pipe
Streamline Copper Tubing, 3 ft L, Solid, Type M, Copper Pipe Shape: Coil, 1/2 in Dia Outside, Copper Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals. Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White
PP PVC 1/2INX10FT CSA APRVD   PIPE POLYE CSA 75PSI 3/4INX5FT Cardel 1/2X2 Copper Tubing
PVC SCH 40 pipe and fittings are commonly used in assembling condensate drainage systems for condensing gas appliances and central air conditioners. IPEX Pipe, Nominal Size: 3/4 in, 5 ft L, 75 psi, Polyethylene, Black Streamline? copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline? copper tube is available in all common types including K-type, L-type, M-type and DWV. Each piece of tube is incised marked and color coded for easy, long-lasting identity. Manufactured in accordance with applicable standards, our ongoing commitment to quality continues to make Streamline? copper tube the preferred and specified brand of industry professionals.
Genova 31012 Cold Water Pressure Pipe 10 ft Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe
PIPE PRE PVC SDR21 1-1/2ID X10
Our Price: $14.99 Exc GST
PIPE DRAIN SOLID CORR 4X10FT
Our Price: $14.99 Exc GST
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Heavy-duty pipe is ideal for field drainage, foundation or window well drainage, downspout or landscape and pond overflow. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Genova 500072 Solid Cut Pipe PP CELLCORE 1-1/2INX6FT ABS   Genova 300 Pipe
Charlotte Pipe Cut Pipe, Nominal Size: 3/4 in, 7/8 in Dia Outside, 2 ft L, CPVC IPEX Pipe, Cellular Core, Nominal Size: 1-1/2 in, 1-1/2 in Dia Outside, 6 ft L, Schedule Rating: SCH 40, ABS JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.
   
 
1 2 3 ... 6