|
|
|
|
|
|
|
|
|
|
|
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
|
Features 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
For use with the Kreg Jig HD and 1-1/2 in and larger stock. Large 2-1/2 in long #14 hardened steel screws provide ideal shear resistance as well as a Protec-Kote finish with 3 anti-corrosion layers for long term moisture resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1/4 in Universal QUIK-LOK? Extension has an innovative design that fits all 1/4 in shanks - with or without a power groove. The unique design requires no tools to change out bits, making it fast and efficient.
|
Use with any chuck side drill 1/2 in and larger. Can be used as adaptor for Lenox Leader tool.
|
Made of high-grade S2 tool steel and milled for precise fit. Specifically built for the higher torque requirements of power tools, can be used with drill chuck or quick change chuck adapter in applications such as appliance, automotive, aviation, decking, drywall, electronics, furniture assembly, general construction and HVACR, 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 150 psi 6 gal oil-free pancake compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high pressure design optimizes air tool performance, delivering 2.6 scfm at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap.
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
Milwaukee's right angle attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4 in hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in-lb of torque. The compact design measures only 2 in wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4 in hex drive accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks.
|
Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage. Heat-treated to resist breakage and wear. Specially designed to reduce stripping. Accepts any 1/4 in hex shank screwdriver bit tip.
|
Built to cut through metal, carbide constructed, high-speed bit cuts up to 18 ga steel, use for HVAC, steel studs, aluminum siding and more, bit tip allows for plunging directly into the work piece for easy cut start.
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in coupler bodies.
|
Eliminates kinked and twisted air line hose by swiveling a full 360 deg. Use on air lines, tools and compressor connections to increase flexibility and convenience. Barb type and male/female connections. 150 psi maximum working pressure.
|
Quick change sleeve for fast bit tip replacement. Magnetic holder for increased driving power. Accepts all 1/4 in hex shank screwdriver bit tips. For use in all drills and screwdrivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed to reduce stripping. Heat treated to resist breakage and wear. Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage.
|
Features an assortment of standard wood and ice hardened metal cutting Sawzall blades for a broad range of professional applications. Set includes (2) 6 in wood cutting blades for increased control, (2) 9 in wood cutting blades for greater cutting capacity, (2) 6 in 14TPI blades for medium to thick metal cutting and (2) 6 in 18 TPI blades for thin metal cutting. Set also includes a roll-up pouch for convenient blade storage.
|
Tool-free operation with universal quick change for all brands of hole saws. No Adapters required, hollow shank for full pilot bit access and durable hardened steel construction. Fits all drill chucks 1/2 in and larger. Includes (1) large quick change arbor.
|
|
|
|
|
|
|
|
|
|
|
|
|
Backing plate is equipped with spring-loaded snap pins which lock into holes on the backing plate for positive efficient transmission of torque. It can be used in 1/2 in capacity drills and larger, arbor has a 5/8-18 thread. Pilot bit used in applications on wood and metal.
|
Milwaukee SHOCKWAVE? Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30X longer life and absorbs 3X more torque vs other impact bits. The precise fit custom machined tip prevents stripping and reduces wobble while the Custom Alloy76 steel and proprietary heat treat process maximizes resistance to wear and shock. SHOCKWAVE? driver bits are built to deliver extreme durability for the most demanding applications.
|
DeWALT Drywall Screw Setter, Phillips Drive, 1/4 in Drive, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
Replaces worn or broken trigger valve for Stanley Bostitch N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes TVA11, roll pin and lubricant.
|
Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage. Heat-treated to resist breakage and wear. Specially designed to reduce stripping. Accepts any 1/4 in hex shank screwdriver bit tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
Formulated for pneumatic tools. Blended using premium-grade turbine oil. Formulated for high-speed and temperature conditions. Has anti-wear additives specially formulated for cylinder type applications. Contains rust and oxidation inhibitors to prevent degradation of tool components.
|
Made of shock-resistant tool steel. Fits directly into the power drill chuck or quick-change chuck adapter. Provides a tight fit in the fastener recess in applications such as cabinetry, decking, drywall, 1/4 in hex shank.
|
All brass fitting with 3/8 in MNPT.
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in shoulder that sets automatic depth of drive for maximum holding power and prevents over-driving. Designed with higher shoulder for deeper penetration when installing grooved deck boards. #15 torx drive.
|
Made of high-grade S2 steel. Hex shank of size 1/4 in.
|
Milwaukee SHOCKWAVE? Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30X longer life and absorbs 3X more torque vs other impact bits. The precise fit custom machined tip prevents stripping and reduces wobble while the Custom Alloy76 steel and proprietary heat treat process maximizes resistance to wear and shock. SHOCKWAVE? driver bits are built to deliver extreme durability for the most demanding applications.
|
|