|
|
|
|
|
|
|
|
|
|
|
|
|
|
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
|
Features 3 anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
For use with the Kreg Jig HD and 1-1/2 in and larger stock. Large 2-1/2 in long #14 hardened steel screws provide ideal shear resistance as well as a Protec-Kote finish with 3 anti-corrosion layers for long term moisture resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1/4 in Universal QUIK-LOK? Extension has an innovative design that fits all 1/4 in shanks - with or without a power groove. The unique design requires no tools to change out bits, making it fast and efficient.
|
Use with any chuck side drill 1/2 in and larger. Can be used as adaptor for Lenox Leader tool.
|
Made of high-grade S2 tool steel and milled for precise fit. Specifically built for the higher torque requirements of power tools, can be used with drill chuck or quick change chuck adapter in applications such as appliance, automotive, aviation, decking, drywall, electronics, furniture assembly, general construction and HVACR, 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one hex key and two feed screws.
|
Milwaukee's right angle attachment allows contractors to drive screws and drill holes in tight, difficult work areas. This attachment is ideal for cordless drills and uses standard 1/4 in hex accessories. It has a durable all-metal housing and steel gears with ball bearing construction which allows this adapter to handle up to 235 in-lb of torque. The compact design measures only 2 in wide allowing it to fit in tight spaces where work is difficult to perform. The convenient quick change chuck accepts standard 1/4 in hex drive accessories.
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage. Heat-treated to resist breakage and wear. Specially designed to reduce stripping. Accepts any 1/4 in hex shank screwdriver bit tip.
|
Built to cut through metal, carbide constructed, high-speed bit cuts up to 18 ga steel, use for HVAC, steel studs, aluminum siding and more, bit tip allows for plunging directly into the work piece for easy cut start.
|
Quick change sleeve for fast bit tip replacement. Magnetic holder for increased driving power. Accepts all 1/4 in hex shank screwdriver bit tips. For use in all drills and screwdrivers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specially designed to reduce stripping. Heat treated to resist breakage and wear. Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage.
|
Features an assortment of standard wood and ice hardened metal cutting Sawzall blades for a broad range of professional applications. Set includes (2) 6 in wood cutting blades for increased control, (2) 9 in wood cutting blades for greater cutting capacity, (2) 6 in 14TPI blades for medium to thick metal cutting and (2) 6 in 18 TPI blades for thin metal cutting. Set also includes a roll-up pouch for convenient blade storage.
|
Tool-free operation with universal quick change for all brands of hole saws. No Adapters required, hollow shank for full pilot bit access and durable hardened steel construction. Fits all drill chucks 1/2 in and larger. Includes (1) large quick change arbor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Backing plate is equipped with spring-loaded snap pins which lock into holes on the backing plate for positive efficient transmission of torque. It can be used in 1/2 in capacity drills and larger, arbor has a 5/8-18 thread. Pilot bit used in applications on wood and metal.
|
Milwaukee SHOCKWAVE? Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30X longer life and absorbs 3X more torque vs other impact bits. The precise fit custom machined tip prevents stripping and reduces wobble while the Custom Alloy76 steel and proprietary heat treat process maximizes resistance to wear and shock. SHOCKWAVE? driver bits are built to deliver extreme durability for the most demanding applications.
|
DeWALT Drywall Screw Setter, Phillips Drive, 1/4 in Drive, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch BlueGranite Turbo? carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills and impact drivers. The bit features an upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete.
|
Made of shock-resistant tool steel for maximum durability. Hardened core for extra strength and reduced breakage. Heat-treated to resist breakage and wear. Specially designed to reduce stripping. Accepts any 1/4 in hex shank screwdriver bit tip.
|
Made of shock-resistant tool steel. Fits directly into the power drill chuck or quick-change chuck adapter. Provides a tight fit in the fastener recess in applications such as cabinetry, decking, drywall, 1/4 in hex shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built-in shoulder that sets automatic depth of drive for maximum holding power and prevents over-driving. Designed with higher shoulder for deeper penetration when installing grooved deck boards. #15 torx drive.
|
Made of high-grade S2 steel. Hex shank of size 1/4 in.
|
Milwaukee SHOCKWAVE? Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30X longer life and absorbs 3X more torque vs other impact bits. The precise fit custom machined tip prevents stripping and reduces wobble while the Custom Alloy76 steel and proprietary heat treat process maximizes resistance to wear and shock. SHOCKWAVE? driver bits are built to deliver extreme durability for the most demanding applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shockwave impact duty driver bit sets are designed for extreme durability and long life. Made from proprietary steel and heat treated to control hardness. Forged tip allows for a secure grip and maximum contact, eliminating stripping or slipping. Set Includes: Phillips Bits - 1'': (1) P1, (1) P2 and (1) P3; Phillips Bits - 2'' Power: (2) P2 and (1) P3; Phillips Bits - 3-1/2'' Power: (1) P2 Square Bits - 1'' (1) SQ1, (1) SQ2 Square Bits - 2'' Power: (2) SQ2 and (1) SQ3; Square Bits - 3-1/2'' Power: (1) SQ2 Slotted Bits - 1'': (1) SL 3/16'' and (1) SL 1/4''; Torx Bits - 2'': (1) T15 and (1) T20; (1) Shockwave Magnetic Bit Holder and (1) case with bulk storage container.
|
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes. Fits 3/8 in and larger drills and drill presses.
|
Quick, easy change-out in production use with S2 tool steel construction and a Rockwell hardness between 58-62. Used in high torque applications, 1/4 in hex drive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee SHOCKWAVE? Impact Duty? magnetic nut drivers are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat-treated to control hardness, the SHOCKWAVE? Impact Duty? magnetic nut drivers feature a powerful magnet allowing for a secure grip and unyielding bit engagement. The bits feature color-coded rings for quick and easy size identification and a chamfered edge to allow for fastening in tight spaces. Broadly targeting cordless users, the SHOCKWAVE? Impact Duty? accessory line is not only ideal for heavy-duty impact applications, but delivers a full system solution for all the user's drilling and fastening needs.
|
Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes; fits 3/8" and larger drills and drill presses.
|
Lenox Reciprocating Saw Blade, Bi-Metal, 9 in Length, 3/4 in Width, 0.05 in Thickness, 6, Reinforced Tuff Tooth Teeth, Universal Tang, High Speed Steel with 8% Cobalt Cutting Edge, Applicable Materials: Wood, Nail Embedded Wood and Non-Ferrous Metal
|
|
|
